Genelec 1031A (Pair) + 1092A Subwoofer (Used)

Two-way active monitor + subwoofer

1031A

The Genelec 1031A is a two-way active monitor system, consisting of a vented enclosure with a multiple amplifier unit set into the back. The amplifier unit contains a low signal level active crossover, two power amplifiers and overload protection for each driver. This design provides high output, low coloration and broad bandwidth. The system's excellent dispersion and precise imaging together with its compact size make it ideal for near field monitoring, broadcast and TV control rooms, mobile vans, home studios and travelling engineers.

Genelec's unique Directivity Control Waveguide™ (DCW ™) Technology is used to provide excellent stereo imaging and frequency balance, even in difficult acoustic environments. This is enhanced by the versatile crossover controls, which allow the precise matching of the speaker system to its surroundings. It is capable of producing peak acoustic levels of over 120 dB SPL at 1m. The only connections to the system are the mains supply and the input signal, making it very easy to use.

1092A

The 1092A is a compact system that will reproduce frequencies of 33 - 80 Hz (± 2.5 dB). The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and a power amplifier. The crossover has 3 signal channels (L/C/R) input and output channels and a discrete subwoofer signal (.1) input, providing great flexibility and allowing easy connection to existing monitor systems, whether one, two or three channel, or to proprietary surround sound decoders. The unit has adjustable sensitivity and a bass roll-off and phase matching control to tailor the response of the subwoofer to its environment.

The combination of the cabinet and amplifier in one unit results in a robust and simple system. The amplifier is mounted on pivoting vibration absorbers, which prevent damage to the electronics and ensures easy access and maintenance of the amplifier.

The cabinet is made from MDF with rounded corners and hardwearing textured black surface. The drivers are concealed inside an efficiency boosting cavity, which also protects them from physical damage.

The 1092A was in production between 1994 and 2003. It was replaced by the LSE™ series subwoofers.

SPECS 1031A

SPL

• Short term RMS @ 1m 110 dB SPL
• Peak per pair with music material 120 dB SPL @ 1m

Drivers

• Bass 8"
• Treble 1" metal dome + DCW

Crossover frequencies 2.2 kHz
Free field frequency response ± 2.5dB 48 - 22 000 Hz

Amplifier power / ch

• Bass 120 W
• Treble 120 W

Speaker dimensions (H x W x D)

• mm 393 x 250 x 290 mm
• inches 15 1/2 x 9 7/8 x 11 7/16"

Speaker weight 12.7 kg (28 lb)

SPECS 1092A

Free field frequency response ( ±2.5dB): 33 - 80 Hz

Maximum short term sine wave acoustic output in half space, averaged from 35 Hz to 85 Hz @ 1m: > 115 dB SPL

Self generated noise level in free field @ 1m on axis (A-weighted): < 10 dB

Harmonic distortion at 100 dB SPL @ 1m on axis in half space (30-100 Hz): < 4%

Driver: 2 x 210 mm (2 x 8")

Weight: 30 kg (66 lbs)

Dimensions:

Height 615 mm (24 3/16")
Width 320 mm (12 5/8")
Depth 510 mm (20 1/16")

AMPLIFIER

Amplifier output power (Long term output power is limited by driver unit protection circuitry): 180 W (4 Ohm)

Amplifier system distortion at nominal output:

• THD < 0.08%
• SMPTE-IM < 0.08%
• CCIF-IM < 0.08%
• DIM 100 < 0.08%

Signal to Noise ratio, referred to full output: > 100 dB
Mains voltage: 100/200V or 115/230V
Power consumption (average): Idle 50 VA Full output 300 VA

FILTER

Subsonic filter (18 dB/octave) below: 33 Hz
Crossover frequency (sub/main monitors): 85 Hz
Crossover frequency (sub input channel): full band/85 Hz

Crossover acoustical slope

• Lowpass: 28 dB/octave
• Highpass: 12 dB/octave

Midband rejection, frequencies > 400 Hz: > 50 dB
Bass roll-off control operating range in 2 dB steps: from 0 to -6 dB @ 33 Hz
Phase matching control in 90° steps: from 0° to -270° @ 85 Hz