Ferrofish Verto32
32 channel ADAT-Dante converter
Dante is the de facto standard for networking audio equipment. With the
Verto 32 it’s now possible to easily integrate up to 32 x 32 channels via ADAT into a Dante network. No matter which ADAT device you use – the Verto 32 makes all channels immediately avalilable in the network: “plug and play”.
The ultra compact device has 8 ADAT connectors: 4 for transmitting, and 4 for receiving digital data (8 channels each).
On the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto 32 supports up to 96kHz sample rate, MIDI jacks for control, and BNC wordclock jacks for external synchronization.
Two other Verto versions are available:
- 64×64 ADAT Interfaces: VERTO 64
- 64×64 MADI Interfaces: VERTO MX
An additional 19″ rack mount kit is available
Specifications
Dante I/O
- 2x RJ-45 Ethernet port (PRIMARY/SECONDARY), 1 GBit Network
- 64 x 64 channel I/O (Dante Brooklyn II board built-in)
ADAT I/O
VERTO 32: 4x ADAT Input + 4x ADAT Output, optical TOSLINK
Channel count:
- 32×32 channels at 48kHz,
- 16×16 channels at 96kHz
VERTO 64: 8x ADAT Input + 8x ADAT Output, optical TOSLINK
Channel count:
- 32×32 channels at 48kHz
- 16×16 channels at 96kHz
MIDI I/O
- 2 x DIN5 connector for MIDI embedding/de-embedding
Wordclock I/O
- BNC: 1 x input, 1 x output
- 75 Ohm Termination set by default (switchable via Dante)
Power Supply
14.4VA (1.2A at 12V)
- Polyfuse internal, self-resetting
- 1 x power supply included
Operation
- Temperature range: 41°F up to 113°F (+5°C up to +45°C)
- Humidity: <75%, non-condensing
Weight/Size
- Weight: 0,9 kg
- Dimensions: 22 x 9 x 4,5 mm (without rack ears)
Optional accessories
- 19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)
- Multi-range Power Supply 12V (EU)
- ADAT Cable Locking Plate (Part. No. 7027)