The Surround Monitor Controller SMC 7.1 is an analog studio monitor controller for 7.1 and stereo sources.
Each of the two balanced 7.1 inputs and the two balanced stereo inputs can be routed to the balanced 7.1 output. The L/R signals of the active input can optionally be routed to the alternative stereo output. With the high-quality headphone amplifier, you can listen to the L/R signal of the active input as well as to single channels of the 7.1 inputs.
The eight-ganged potentiometer controls the volume of all channels directly – no control circuits like VCAs are used.
The SMC 7.1 is built up in high-quality analog technique, which ensures a linear frequency response up to 100 kHz as well as an outstanding dynamic range.
Two Balanced 7.1 Inputs
Two Balanced Stereo Inputs
Balanced 7.1 Output
Balanced Stereo Output with Sub Out
Extensive Routing Options
Solo in Place / Solo to Center
High-Quality Headphone Amplifier
Dedicated Analog Meter Output
Internal Power Supply
Made in Germany
Specifications
Inputs
Sub-D-25-Input
Sub-D-25 (TASCAM-Standard)
Impedance: 20 kOhms
CMR: -82 dB
Max. Input level: +22 dB
XLR-Input
Neutrik XLR, symmetrisch, Pin 2 = (+)
Impedance: 20 kOhms
CMR: -82 dB
Max. Input level: +22 dB
Outputs
Sub-D-25-Output
Sub-D-25 (TASCAM-Standard)
Frequency range: 10 Hz to 150 kHz ( -3 dB)
Crosstalk at 1 kHz: -92 dB
THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
Noise (A-weighted): -93 dB
Dynamic range: 115 dB
XLR-Output
Neutrik XLR, balanced, Pin 2 = (+)
Frequency range: 10 Hz to 150 kHz ( -3 dB)
Crosstalk at 1 kHz: -92 dB
THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
Noise (A-weighted): -93 dB
Dynamic range: 115 dB
Headphone Output
6,35 mm TRS connector
Pin wiring: Tip = Left, ring = right, sleeve = GND
Impedance: 22 kOhms
Frequency range: 10 Hz to 80 kHz ( -3 dB)
Crosstalk at 1 kHz: -70 dB
THD & N: 0,001% (0 dBu, 1 kHz, 40 kOhms load)
Noise (A-weighted): -93 dB
Dynamic range: 113 dB
Internal operating voltages
Analog: +/- 18 V Power supply
Mains voltage (switchable): 230 V AC / 50Hz or 115 V AC / 60Hz
Fuses: 230 V = T 500 mA; 115 V = T 1 A
Power consumption: max 25 VA
Dimensions and Weight
(WxHxD) 10.95 x 4.6 x 13.1 in (278 x 103 x 333 mm)