APS Aeon - Pair (Used)

Active 2-way monitor

AEON monitor is an active 2-way appliance equipped with two speakers (tweeter and woofer) and two independent power amplifiers (one for each speaker) fixed on the back plate of the enclosure, as well as with an appropriate set of precise controls, indicators, inputs and security circuits.

The monitor construction is based on speakers produced by a Norwegian company SEAS. The woofer meets the APS strict requirements. The monitors are offered in two versions: with a titanium or a fabric dome tweeter.

The monitor has been closed in the bass reflex enclosure with front ventilation, providing a dynamic bass properly filled with low frequencies. The edges of the monitor enclosure have been rounded to reduce reflections and to improve the quality of produced sound. The inner wall of the enclosure completely separates the electronic module from the speaker chamber at the same time constitutes a significant reinforcement of the enclosure, eliminating excessive oscillations of the monitor's side walls.

SPECS

Type Active – two power amplifiers – AB class
System Two-way
Crossover Frequency 1.5 kHz
Dimensions: H x W x D 42.2 cm 27.2 cm 36.2 cm 16.6'' 10.7'' 14.3''
Free Field Frequency Response ± 2 dB: 30 Hz - 30 kHz
SPL max in 1m Free Field RMS: 108 dB (single) Peak: 116 dB (pair)
Weight (piece) 18 kg / 39.7 lbs
Woofer 22 cm (8 2/3’’) cellulose, surround: rubber Technical specifications near-mid AEON field monitor
Tweeter 2.5 cm (1”) fabric or aluminium dome
Bass/Mid-Range Power Amplifier 140W RMS 4 Ω
Tweeter Power Amplifier 106W RMS 6 Ω
Total Harmonic Distortions 0.005 % 5W, 1 kHz; 0.1 % max 0.1 up to 50W, 20Hz up to 20kHz
Input Voltage Level for 100dB SPL in Free Field @ 1m 0 dBu (i.e. 0.775 V) regulators in 0dB positions
Input Sensitivity Switch 30dBu, 22dBu, 15dBu, 9dBu, 4dBu, 0dBu, -3dBu, -10dBV
Tweeter Level Switch -5dB, -3dB, -1.5dB, -0.5dB, 0dB, 0.5dB, 1.5dB, 3dB
Bass Controller Switch On / Off
Bass Controller 34 Hz -15dB, -12dB, -9dB, -6dB, -3dB, 0dB, 3dB, 6dB
Ground-Lift Switch On / Off
Input Balanced combo socket: XLR or TRS. Impedance 10 kΩ
"Loop Through" Output Balanced XLR Impedance 100 Ω
Power Amplifiers Protections Pop-free start & stop, thermal, interference, short circuit, overload
Clipping LEDs
Prevention from Interferences and Hums GROUND-LIFT switch
Power Switching On Lit up logo – blue LED
Tweeter Amplifier Overdrive Lit up logo – green LED
Woofer Amplifier Overdrive Lit up logo – red LED