4MS DLD Dual Looping Delay (Black)

• Two independent delay/loop channels, synchronized to a common time base
• Almost 3 minutes delay/loop time per channel (2:54) in default storage mode (16-bit)
• 48kHz/16-bit sampling rate, option available for 24-bit storage
• Extremely quiet, low noise and low jitter design
• Normalled connections of input and output for flexible use in mono, stereo, or dual mode
• Tap tempo button and clock Ping input set the basis for one "beat"
• Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
• Sample-accurate clock output for perfect synchronization
• Loop clock outputs for each channel
• Time switches change range of Time knob from 1/8th notes up to 32 bars
• Digital feedback, up to 110%
• Delay Level control, independent of dry/wet signal mix
• Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
• Reverse mode plays memory contents backwards
• With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
• Triggered toggle inputs for Infinite Hold and Reverse
• Send and Return on each channel for feedback with external modules
• CV jacks to control Time, Level, and Feedback
• As new features are developed, firmware can be updated by playing an audio file into the DLD

4ms Dual Looping Delay (Black)

Modulo di ritardo

• Ping Lock per ogni canale
• Modalità Quantized Inf/Rev/Time Change
• Audio a 24 bit (selezionabile con un ponticello)
• Reverse e Inf Hold possono essere attivati con gate o trigger
• La manopola Delay Feed può essere selezionata come conicità audio o lineare
• La corrente continua in fuga con impostazioni di feedback elevate (ad es. ritardi di risonanza) viene eliminata
• Il silenziamento automatico ora ha un attacco e un decadimento di 1 ms
• Il tempo di dissolvenza incrociata (CFT) per le giunzioni è ora variabile (impostato in System Mode da 0ms a 500ms)
• Selezione di algoritmi di De-jittering del clock esterno per consentire al DLD di sincronizzarsi con molti tipi di clock esterni
• L'uscita da Infinite Hold viene riprodotta senza riavviare il loop

Specifiche Tecniche

• Module size:
  • 20 HP Eurorack format module
  • 0.98" (25mm) maximum depth with power cable
• Power consumption:
  • +12V rail: 188mA max (jumper set to 5V)
  • -12V rail: 48mA max
  • +5V rail: not used
  • Connect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER
• Audio Inputs:
  • 0Hz (DC) to 24kHz
  • 16.8V peak-to-peak maximum before clipping (when AC coupled)
  • Optional jumper to choose DC or AC coupling on input.
• Audio Outputs:
  • 0Hz (DC) to 24kHz with maximum -1.7dB difference between input and output (see technical specification section)
  • +10.5V to -10.5V maximum output
  • Soft limiting compression allows for saturation before clipping (can be disabled)
• Clock outputs (Main, Loop A, Loop B):
  • 0V to 8.2V
  • +/- 2.4us maximum jitter (i.e. 0.001% at 120 BPM)
  • Rise or Fall time: <1us
  • Pulse Width (Trigger mode) 22ms
  • Gate mode 50% (square wave)
  • At clock speeds faster than 22Hz, the clock output becomes 50% duty cycle

• 16-to-16 pin power cable
• 4 M3 Knurlie screws