SPL SMC 7.1 (Silver)
Il controller per monitor surround SMC 7.1 è un controller per monitor da studio analogico per sorgenti 7.1 e stereo.
Each of the two balanced 7.1 inputs and the two balanced stereo inputs can be routed to the balanced 7.1 output. The L/R signals of the active input can optionally be routed to the alternative stereo output. With the high-quality headphone amplifier, you can listen to the L/R signal of the active input as well as to single channels of the 7.1 inputs.
The eight-ganged potentiometer controls the volume of all channels directly – no control circuits like VCAs are used.
The SMC 7.1 is built up in high-quality analog technique, which ensures a linear frequency response up to 100 kHz as well as an outstanding dynamic range.
- Two Balanced 7.1 Inputs
- Two Balanced Stereo Inputs
- Balanced 7.1 Output
- Balanced Stereo Output with Sub Out
- Extensive Routing Options
- Solo in Place / Solo to Center
- High-Quality Headphone Amplifier
- Dedicated Analog Meter Output
- Internal Power Supply
- Made in Germany
Specifiche Tecniche
Inputs
Sub-D-25-Input
- Sub-D-25 (TASCAM-Standard)
- Impedance: 20 kOhms
- CMR: -82 dB
- Max. Input level: +22 dB
XLR-Input
- Neutrik XLR, symmetrisch, Pin 2 = (+)
- Impedance: 20 kOhms
- CMR: -82 dB
- Max. Input level: +22 dB
Outputs
Sub-D-25-Output
- Sub-D-25 (TASCAM-Standard)
- Frequency range: 10 Hz to 150 kHz ( -3 dB)
- Crosstalk at 1 kHz: -92 dB
- THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
- Noise (A-weighted): -93 dB
- Dynamic range: 115 dB
XLR-Output
- Neutrik XLR, balanced, Pin 2 = (+)
- Frequency range: 10 Hz to 150 kHz ( -3 dB)
- Crosstalk at 1 kHz: -92 dB
- THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
- Noise (A-weighted): -93 dB
- Dynamic range: 115 dB
Headphone Output
- 6,35 mm TRS connector
- Pin wiring: Tip = Left, ring = right, sleeve = GND
- Impedance: 22 kOhms
- Frequency range: 10 Hz to 80 kHz ( -3 dB)
- Crosstalk at 1 kHz: -70 dB
- THD & N: 0,001% (0 dBu, 1 kHz, 40 kOhms load)
- Noise (A-weighted): -93 dB
- Dynamic range: 113 dB
Internal operating voltages
- Analog: +/- 18 V Power supply
- Mains voltage (switchable): 230 V AC / 50Hz or 115 V AC / 60Hz
- Fuses: 230 V = T 500 mA; 115 V = T 1 A
- Power consumption: max 25 VA
Dimensions and Weight
- (WxHxD) 10.95 x 4.6 x 13.1 in (278 x 103 x 333 mm)
- 9.04 lbs (4.1 kg), unit only
- 11.02 lbs (5.0 kg), shipping