FERROFISH A32 Dante Singlemode

Convertitore AD/DA 64x64 Dante/ADAT/MADI versione Singlemode

FERROFISH
SKU: 31671
  • Esaurito

4.428,60 € 3.630,00 + IVA

  • Shipping icon Spedizione gratuita

FERROFISH A32 Dante Singlemode

Convertitore AD/DA 64x64 Dante/ADAT/MADI versione Singlemode

Versione Singlemode L'A32 Dante è la versione “fully loaded” dell'A32. Oltre agli I/O della versione A32, questo modello offre in aggiunta 64×64 I/O in formato DANTE, il che rende facile integrare questo apparecchio in un network DANTE esistente. Naturalmente offre le stesse funzioni dell'A32 originale. Estremamente flessibile L'A32 Dante offre una flessibilità impareggiabile grazie ai 32X32 canali A/D e D/A, porte MADI ottica e coassiale, 32×32 I/O ADAT (ADAT4 può essere impostato su S/PDIF) e una uscita cuffia con matrice di monitoring. I quattro schermi TFT a colori offrono una visuale dettagliata di tutti i livelli e impostazioni digitali e analogici. A questo si aggiunge un intuitivo controllo one-knob e un sistema di help sempre attivo. Convertitore e Matrice di Routing Oltre a convertire in vari formati digitali da e verso ingressi e uscite analogici, l'A32 Dante offre anche una sofisticata matrice di routing. Con la matrice source-destination, si possono effettuare velocemente conversioni parallele di formato (es. ADAT a MADI e Analog a Dante) assieme a assegnazioni complesse di routing. E' anche possibile creare uno stream DANTE consistente in segnali analogici, ADAT e MADI, senza problemi.

Specifiche Tecniche

Dante I/O

2 x RJ-45 Ethernet connector (CAT5/6 cables), 64 x 64 channel Brooklyn II board built-in. MADI I/O (AES10) Optical (multimode) + Coaxial interface
  • 64 channels @32kHz, 44.1kHz, 48kHz
  • 32 channels @64kHz, 88.2kHz, 96kHz
  • 32 channels @128kHz, 176.4kHz, 192kHz*
* both MADI ports work independently to achieve full 32+32 channel transmission Support of MIDI over MADI. Latency: 3 samples Redundancy: Automatic switching between optical <-> coax MADI when signal lost. Analog Inputs (AD) 4 x CS5368 (Cirrus Logic) 4 x DSub25 / Tascam
  • Analog switches: +20dBu, +13dBu, +4dBu
  • Digital gain: +20dBu … -8 dBu, 1dB steps
Latency
  • @48kHz: 12/fs, 0.25ms,
  • @96kHz: 9/fs, 0.09ms,
  • @192kHz: 5/fs, 0.03ms
OpAmps RC4580 + OPA1664 Level indicator TFT screen, 28 levels Analog Outputs (DA) 4 x CS4365 (Cirrus Logic) 4 x DSub25 / Tascam
  • Analog switches: +20dBu, +13dBu, +4dBu
  • Digital gain: +20dBu … -8dBu, 1dB steps
Latency
  • @48kHz: 7.8/fs, 0.16ms,
  • @96kHz: 5.4/fs, 0.06ms,
  • @192kHz: 6.6/fs, 0.03ms
OpAmps RC4580 + OPA1664 Level indicator TFT screen, 28 levels Headphones Out
  • 1 x ¼” (6.3mm) TRS jack, stereo.
  • Provides an independent stereo channel.
  • Selectable mono/stereo source or one of 5 mixes of all inputs and outputs.
  • Digitally controlled volume level.
ADAT I/O 4+4 optical interfaces (8 channels each with 48 kHz)
  • 32 channels @32kHz, 44.1kHz, 48kHz
  • 16 channels @64kHz, 88.2kHz, 96kHz
  • n/a @128kHz, 176.4kHz, 192kHz
Latency: 3 samples SPDIF I/O ADAT 4 I/O can be reconfigured as S/PDIF I/O. The input includes a sample rate converter (performance of SRC: -128dB) The output follows the sample frequency of the A32. MIDI I/O
  • 2 x DIN5 connector for remote control of the unit
  • Conversion MIDI <> MIDI over MADI possible
Wordclock I/O
  • BNC: 1 x input, 1 x output
  • 75 Ohm Termination switchable for input
Power Supply 12V, 3A
  • 2 x input jacks with screw lock for redundant power.
  • Voltage supervision, warning message on screen when PSU input fails
  • Internal resettable polyfuse
  • 1 x power supply included
USB Port 1 x USB 2.0 for Remote/Updates Additional Features
  • 192 kHz operation (S/MUX up to 192kHz).
  • Individual delay-compensation of all analogue outputs.
  • DSP Plugin-ready
  • MIDI in/out plugs Headphone /submix output for easy control.
  • MIDI over MADI Preset Management
  • Extensive routing/mixing possibilities.
  • Redundancy (MADI I/O, Dante I/O, Power Supplies).
Internal Clock
  • Temperature compensated oscillator, with high accuracy.
  • Initial accuracy: +/-1.5ppm
  • Over temperature range: +/-2.5ppm
  • Aging: +/-1ppm
PLL
  • Digitally controlled PLL / Jitter reduction system
  • Output jitter: 50ps … 100ps typ.
LCD Displays
  • 4 x TFT Screens for the complete control of all analog I/O levels and all settings of the unit
  • One Key Control provides an easy control of all functions.
  • Multi language help pages guides available (No need to study the manual.)
Audio Core Processor
  • Sharc DSP ADSP-21489 / 400MHz.
  • Routing and processing of of all 384 audio channels.
  • Mixing to headphone output.
  • Independent mixing to selectable analog output pair.
  • Calculation of DSP plugins.
Dimensions
  • 1HU
  • Depth: 27cm (10.6”) (including connectors)
Weight 4.1kg (9 lbs) Ambient temperature 41°F up to 113°F (+5°C up to +45°C)
Il tuo carrello

Carrello vuoto

Paesi e Lingue
Comment iconParla con noi