- 2220 Watts of Power
- 80 Hz Balanced Analog High-Pass Filter
- Bass Response Down to 25 Hz
- Dual-Force™ Technology
- (6) 8” Aluminum Woofers
- MEME™ Technology
Barefoot Sound MicroStack 45
Monitor da studio attivo a 3 vie con subwoofer stereo e tecnologia MEME™
Stack System formato da una combinazione di MicroMain45 e MicroSub45.
With the recent introduction of Barefoot Sound’s MicroSub45 Dual-Force™ technology subwoofer you can create MicroStack45, a stereo package of two MicroMain45 3-way active reference monitors and two MicroSub45 subwoofers. Each stereo system incorporates a pair of 1-inch tweeters, four 2.5-inch midrange drivers and six high-excursion 8-inch woofers, all designed to work seamlessly together and as a single unit.
INTRODUCING MICROSTACK45
With the recent introduction of Barefoot Sound’s
MicroSub45 Dual-Force™ technology subwoofer you can create MicroStack45, a stereo package of two
MicroMain45 3-way active reference monitors and two MicroSub45 subwoofers. Each stereo system incorporates a pair of 1-inch tweeters, four 2.5-inch midrange drivers and six high-excursion 8-inch woofers, all designed to work seamlessly together and as a single unit.
DUAL-FORCE LOW FREQUENCY EXTENSION
MicroSub45 subwoofers feature Barefoot’s innovative
Dual-Force technology, housing a pair of opposing 8-inch aluminum cone drivers plus a balanced analog high-pass filter that crosses the system over at 80 Hz. Dual-Force technology eliminates vibration within the MicroSub45 speaker cabinet, delivering clean low frequency extension down to 25 Hz when combined with the MicroMain45.
STACKS AND TILTS
Barefoot Sound’s MicroStack45 system works optimally when the MicroMain45 monitors are positioned either directly on top of or underneath the MicroSub45 subwoofers, depending on your preference. A tilt feature enables the MicroMain45 monitors to be directed at the listening sweet spot and is designed so that the stack is very sturdy and will not slip.
If you are working to a budget, you can start with a stereo pair of MicroMain45 monitors then add two MicroSub45 subwoofers when the time is right.
Specifiche Tecniche
Description: |
3-way Active Reference Monitors and Stereo Subwoofers with MEME™ Technology |
Controls: |
Input level stepped attenuator, Equalization contour |
Input Impedance: |
50k Ohm |
Frequency Response: |
MicroMain45
18Hz – 50kHz (±3dB)
26Hz – 40kHz (±1dB) |
Bass Response: |
-3 dB @ 25Hz, Q = 0.707
Slope = 12 dB/octave |
Cabinets: |
32 liters total internal volume together. Both units are sealed woofer and midrange enclosures, Machined aluminum baffle plate, Long fiber foam acoustic damping throughout |
Crossover Frequencies: |
80 / 600 / 3600 Hz |
Tweeter: |
1″ ring radiator, Advanced geometry motor, Rear waveguide chamber
Amplifier: 180W Hypex |
Midranges: |
2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursion
Amplifier: 180W Hypex |
Woofers: |
2 x 8″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursion
Amplifier: 500W |
Subwoofers: |
4 x 8″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursion
Amplifier: 1000W |
AC Power Input: |
Nominal 115 VAC or 230 VAC selectable |
Power Consumption: |
Idle: 25W, Maximum: 1165W |
Weight: |
MicroMain45
Speaker: 37.5 lbs each (17 kg)
Shipping: 47 lbs each (21 kg)
MicroSub45
Speaker: 45 lbs each (20.5 kg)
Shipping: 54.5 lbs each (25 kg) |
Dimensions HxWxD: |
MicroMain45
Cabinet: 11.0 x 15.5 x 10.75 inches (279 x 394 x 273 mm)
Overall: 11.0 x 15.5 x 11.0 inches (279 x 394 x 279 mm)
MicroSub45
Cabinet: 14.0 x 9.5 x 13.0 inches (356 x 241 x 330 mm)
Overall: 14.0 x 10.25 x 13.6 inches (356 x 260 x 345 mm)
Stack 14.0 x 20.50 x 13.6 inches |