MDLR CASE erformer Series MKI 6u/104HP

The 2 x 104HP Performer Series with PSU case is the first entry level model in lineup.

SKU: 47243

Próximamente

€ 818,24 € 676,23 + IVA

Póngase en contacto con nosotros para comprobar los plazos de entrega

Añadir

Seguimos en contactoDescubra nuestros horarios de apertura

MDLRCASE Performer Series MKI 6u/104HP

The 2 x 104HP Performer Series with PSU case is the first entry level model in lineup.

Meet the new MDLRCASE portable Eurorack case; the 6U 104HP Performer Series MKI.

The 6U 104HP Performer Series MKI case is our first portable case and is the first entry level model in our lineup. This is the perfect solution if you’re looking for a portable Eurorack case that can be used both in the studio or live on stage.

Filling two rows measuring 104HP and powered by Boardpower feeding two busboards, this 6U case offers 40 headers of connectivity giving you enough power to drive your favorite modules as you go out on the road to play.

You can easily take this rig with you while it’s fully patched because our lid design builds in the required spacing for your cables, making this unit a favorite for its ease of use.

With reliability in mind we build our cases with Penn Elcom components for maximum durability and apply a two-component coating solution that adds an extra layer of protection to your serious investment.

Two adjustable feet in the bottom of the case allow the artist to set the optimal playing angle assuring maximum ergonomics while increasing fun and comfort for the performer.

Specifications

104HP 6U (208HP module space)
Dimensions: L= 60cm W=32cm H=16,3cm
Total weight 5,7 kg
Space from top rail to bottom 7cm
Can be carried while patched
Handmade case, fully nailed and glued construction.
12mm birchwood with a special 2 layer protection coating
Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
Lid allows to carry the case fully patched
4x 104HP rails with M3 threaded inserts
Konstantlab Boardpower lightweight PSU. +12V 2A, -12V 1.2A, 5V 1.5A
2 x MDLRCASE Passive busboard, total of 40 headers.
Total weight: 5,7 kg (w/ PSU, busboards and rails installed, including lid.)
1 side-mounted power switch + powerinlet
1x 1.8m power cord
1 x Meanwell power adapter included
High-quality Penn Elcom components
Super-comfortable Luxe carrying handle
Anti-slip rubber feet
Completely assembled, wired, tested, and ready to play!

PSU: Konstantlab Boardpower Dimensions: 10 × 4.5 × 2 cm Weight: 127 g OUTPUT POWER: 45W OUTPUTS: +12V / 2A -12V / 1.2A +5V / 1.5A INPUT 18V (16-20V) OUTPUT CONNECTORS 2x 16 pin IDC for flat cable 4x WAGO spring terminals INPUT CONNECTORS WAGO spring terminals Panel with 5,5 x 2.1 DC input (center positive) and switch included PROTECTIONS Input filter Input overvoltage Input reverse polarity voltage protection Output overvoltage Output short circuit – automatic recovery Output over current – automatic recovery All output protections are independent for each rail EFFICIENCY 92% OTHER Input common-mode LC filter with high efficiency of canceling noise and interference from input connector Additional input filter on each regulator

MDLRCASE busboard:

2x screw terminals for power supply/second busboard connection 20x standard eurorack power connectors with safety notches to protect from modules reversed connections 3 power rails 12V, -12V, 5V voltage indicator LED on every power line decoupling capacitors to remove residual PSU ripple at every power line switchable 5V linear voltage regulator for power supplies that don’t support 5V output Weight: 5,7 Kg

Seguir leyendo

Width

104 hp

MDLR CASE erformer Series MKI 6u/104HP

MDLRCASE Performer Series MKI 6u/104HP

The 2 x 104HP Performer Series with PSU case is the first entry level model in lineup.

Specifications

Su cesta

Países y lenguas

Paesi

Lingue