DOEPFER A-160-2 Clok Divider

Doepfer’s second generation clock divider has been significantly enhanced when compared to the A-160: three sets of clock divisors and two output modes can be selected from and with jumpers the reset behaviour and polarity of inputs and output signals can be set. This allows for adjusting the module exactly to your needs. The upper switch offers two output modes: Gate: normal behaviour of a binary divider Trig: input pulse width affects output pulse widths The bottom switch selects one of three clockdivider modes with different divisors: power of two: 2, 4, 8, 16, 32, 64, 128 prime numbers: 2, 3, 5, 7, 11, 13, 17 integer: 2, 3, 4, 5, 6, 7, 8 Jumpers on the PCB give you extended options: First if the module triggers on the rising edge or the falling edge of the input clock. Second whether the clock outputs are normal or inverted. The third option affects the reset behaviour: Reset the level at the Reset input triggers the Reset edge triggered: reacts on the edge of reset signal positive: resets on a level above 2.5V or the rising edge negative: resets on a level below 1V or the falling edge