2x Meanwell GSM60A18P1J power adapter including
We’ve been listening to modular artists and have developed what we believe is the best solution for those in need of a flexible portable case. We’ve upgraded our cases with the newest MDLR PWR powered busboards, giving you maximum space for your modules, strong power outputs, less heat and by using low voltages inside the case a super safe PSU solution.
This professional handmade 12U / 104hp width Performer Series Eurorack modular synthesizer case is at home both on the road and in the studio.
A unique feature of this design is a detachable middle “ring” that acts as a spacer enabling the case to remain patched while closed yet keeping the modules flush-mounted when open. Even better, this ring also functions as a rock-solid stand for the top section holding it at the perfect angle for performance.
12U Performer Series features
12mm birchwood fully nailed and glued construction
Sprayed with special 2-layer black protective coating
Detachable middle ring/spacer allows modules to be fully-patched during transport
Spacer functions as a rock-solid stand when the case is open
Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
Top and bottom sections can be detached and set up side-by-side as two separate 6U cases
Eight 104HP rails with M3 threaded inserts
Two MDLR PWR powered busboard, (80 power headers in total)
Two side-mounted power switches + powerinlet
Two 1.8m power cords
High-quality Penn Elcom components
Super-comfortable Luxe carrying handle
Anti-slip rubber feet
Completely assembled, wired, tested, and ready to play!
Dimensions (L/W/H)
59,5 cm x 33 cm x 25,5 cm
Total Weight
9.8 kg (includes rails, power supplies and other hardware)
Module depth
7 cm available depth between top of rail and bottom of case
5,4 cm available depth between top of rails and top of shrouded header
4.2 cm available depth between top of rail and power supply
POWER SUPPLY OPTIONS
MDLR PWR powered busboard 45W version.
MDLR PWR is a high precision low noise and high power bus board for your eurorack modular systems. With a total of 40 headers you’ll never run out of connectivity, so all your lovely modules can be easily connected.
Due to super easy installation (it’s only about connecting two cables) this MDLR PWR PSU solution is perfect for use in DIY projects as well.
By using an external PSU adapter there is no risk of high voltages inside your eurorack case.
MDLR PWR is fully protected on the input as well on the output to ensure maximum security.
Technical specifications:
Power 45W
Dimensions 420 x 140mm
Height 23mm
Weight 400g
Outputs:
+12V / 2A
-12V / 1.2A
+5V / 1.5A
Output stability ±1% for 0-100% load
Input 18V ( 16V – 20V )
Output Connectors 40 x 16 pin IDC for flat cable
Input connectors WAGO spring terminals + 5.5 / 2.1 DC inlet
Protections
Input overvoltage
Input reverse polarity
Output overvoltage
Output short current – automatic recovery
Output over current – automatic recovery
All output protections are independent for each rail
Efficiency 92%
Other Input common mode LC filter with high efficiency of canceling noise and interference from input connector
Additional input filter on each regulator for minimal output noise and interferences
Shield for reduce RF interferences from regulators
Star distribution topology on PCB
Each “beam” from star topology has 4 headers with noise canceling capacitors.
In star topology center are another noise canceling capacitors
A big ground plane on both sides of PCB
Blue LEDs indicate present and drop of output voltage
Recommended power brick for one board – Mean well GSM60A18-P1J