- Versatile linear, exponential, and logarithmic envelope generator/LFO
- Low-noise, low-distortion, DC-coupled linear VCAs
- 100% analog
- Shape Slider, CV Jack and Attenuverters for fading between Exponential, Linear and Logarithmic envelope shapes without changing the envelope timing
- Sliders and Range switches control Rise and Fall times from ~2ms to > 2 min.
- Time CV jack extends time range: ~400µs (2.5kHz) to ~1 hour
- Independent attenuverters for Rise and Fall time
- Blue/Red LEDs indicate strength and polarity
- Cycle buttons for looping envelopes (LFO)
- Trigger input jack and switch for toggling between AR, ASR, and Cycle modes of triggering
- EOR/F (End of Rise/Fall) gate outputs can be used to chain and sequence events
- Env Level and Offset knobs scale and shift Env Out without changing VCA volume
- Audio In and Out jacks for passing audio or CV through the VCA
- VCA CV inputs to use VCAs independently from the envelopes
- VCA gain internally connected to envelope output when VCA CV jack is left unpatched
- Follow input jacks allow for slew limiting, ADSRs, and exotic filtering effects
- Re-trig jumpers allow for re-triggering during rise phase
4ms Shaped Dual EnvVCA
Generatore di inviluppo analogico a due canali con waveshaper e un VCA stereo lineare
Shaped Dual EnvVCA è un generatore di inviluppo analogico a due canali con waveshaper e un VCA lineare stereo. A differenza dei moduli di inviluppo analogici convenzionali, la forma d'onda di ciascun inviluppo può essere controllata con uno slider o un CV senza modificare la temporizzazione dell'inviluppo. Con un'ampia gamma di tempi da un'ora a 2,5 kHz e una pletora di ingressi CV e attenuatori, può essere utilizzato come LFO, oscillatore di frequenza audio, limitatore di rotazione, wavehaper, ASR/ADSR/complesso EG, audio indipendente/CV VCA, inseguitore di busta, processore sidechain e modulo di utilità generale. Ogni canale ha uscite lineari dedicate più attenuatori e controlli offset per le uscite a forma d'onda variabile, che lo rendono una sorgente di modulazione ideale e un VCA stereo.
Specifiche Tecniche
- 20HP Eurorack format module
- 0.95” (24mm) maximum depth (includes power cable)
- 10-pin Eurorack power header
- Power consumption
- Audio/VCA
- 100k input impedance, 1k output impedance, DC-coupled
- VCA gain range: -90dB to +2.0dB, linear response to CV from 0V to 5V
- VCA unity gain: 4.4V CV
- DC to 20kHz, +/-0.1dB
- Envelope Times
- Minimum rise or fall time: ~200us per segment (2.5kHz max frequency)
- Maximum rise time: >20 minutes (typically > 40 minutes)
- Maximum fall time: >12 minutes (typically > 20 minutes)
- Jacks:
- Env jack: Min = -10.2V, Max = +10.1V
, maximum amplitude 9.3Vpp
- Trigger jack: rising edge threshold = 1.25V
- Follow jack: active range = 0V to +5V
- EO* jacks:
- EOR (channel A): <80mV low to >4.50V high gate output
- EOF (channel B): <80mV low to >4.95V high gate output
- Minimum stable pulse width: 1ms. Shorter than this may produce extra 50µs pulses
- Audio In/Out jacks: -10V to +10V maximum range without clipping