- Field Effect Transistor (FET) based gain reduction circuit
- Audio circuit uses 12AT7WC and 12BH7, dual-triode vacuum tubes
- Custom proprietary API output transformer
- 11-step attack time switch
- 11-step release time switch
- 4 fixed ratios
- 31-step input/threshold control
- 31-step output/make-up gain control
- Detented controls for accurate recall
- Patented THRUST® switch for frequency-dependent side chain control
- D-S feature provides high-frequency dependent side-chain control for de-essing
- Link Switch for stereo operation
- 10-segment LED gain reduction meter
- LED peak indicator
- Classic analog VU meters for output
- IN/OUT switch
- Full hard-wired relay bypass
- XLR and 1/4" TRS input and output connections
API Select T25 Tube Compressor
Compressor / Limiter a 2 canali
L'API Select T25 è un classico compressore/limitatore in stile feedback FET a 2 canali con uno stadio di uscita a valvole di Classe A che utilizza un trasformatore API personalizzato. Costruito con tubo a vuoto a doppio triodo 12AT7WC e 12BH7, il T25 rappresenta una nuova direzione nella linea di compressori API. Offre all'utente un set di funzionalità potente e flessibile, inclusa la possibilità di utilizzo in modalità dual mono o stereo, ed è accuratamente progettato per offrire prestazioni valvolari classiche. Il T25 eccelle nel fornire l'inconfondibile suono delle API e presenta la nostra esclusiva garanzia di cinque anni del settore.
Specifiche Tecniche
Input Impedance: |
20kΩ |
Output Impedance: |
75 ohms, can drive 600 ohm loads |
Maximum Output Level: |
+24dBu |
Frequency Response: |
20Hz – 40kHz (+0dB / -1dB) |
Ratios: |
2:1, 4:1, 8:1, 20:1 (switchable) |
Attack Times: |
20μs – 0.8ms |
Release Times: |
50ms to 1.2s |
Total Gain: |
+40dB, IN/OUT both fully CW |
SNR: |
90dB |
Power Consumption: |
45W |
Size: |
19" x 3.5" x 12" Deep |
Size (Boxed for Shipping): |
21" x 9" x 15" |
Actual Weight: |
14 lbs. |
Shipping Weight: |
17 lbs. |